SHARP

Language

LOADING PAPER IN THE LARGE-CAPACITY TRAY (WHEN A LARGE CAPACITY TRAY IS INSTALLED)

The large capacity tray is used for very large print jobs that cannot be handled with a regular tray. Up to 3000 sheets of 8-1/2” x 11" (A4 or B5) paper (21 lbs. (80 g/m2)) can be loaded in the tray. If you find it necessary to change the paper size, consult the dealer or nearest SHARP Service Department.

If you loaded paper of a different type from the paper previously loaded, be sure to check the settings in "Settings".
To check the paper type loaded in the tray
[Tray Settings] in the home screen or in "Settings", select [Status] → [Machine Identification] → [Paper Input Tray Status]→ [Paper Tray Settings].

Caution

When the tray is open, do not place heavy objects on the tray or press down on the tray.

Open the top cover.

Fan the paper.

Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed.

Place the paper in the paper feed table.

Insert the paper into the tray until it stops. Place the paper print side down. The stack should not exceed the indicator line (maximum 3000 sheets).
When adding paper, take care that previously loaded paper does not shift out of place. This may cause misfeeds and folding back of the front edge of the loaded paper.

Gently close the cover.

Language

Version 04a / bp70c65_usr_04a_us

↑Top of page