Various devices mounted on the machine can be set.
One of the 8 groups of standard original sizes shown
below can be selected for detection by the original size detection function.
| Selections | Detectable original sizes | |
|---|---|---|
| Document Glass | Document feeder tray (automatic document feeder) | |
|
AB-1 |
A3, A4, A4R, A5, B4, B5, B5R |
A3, A4, A4R, A5, A5R, A6R*, B4, B5, B5R, 11"x17", 8-1/2"x14", 8-1/2"x11" |
|
AB-2 |
A3, A4, A4R, A5, B5, B5R, 216 mm x 330 mm (8-1/2" x 13") |
A3, A4, A4R, A5, A5R, A6R*, B4, B5, B5R, 11” x 17", 8-1/2” x 11", 216 mm x 330 mm (8-1/2"x13") |
|
AB-3 |
A4, A4R, A5, B4, 8K, 16K, 16KR |
A3, A4, A4R, A5, A5R, A6R*, B4, 11” x 17", 8-1/2” x 11", 216 mm x 330 mm (8-1/2” x 13"), 8K, 16K, 16KR |
|
AB-4 |
216 mm x 340 mm (8-1/2" x 13-2/5"), A3, A4, A4R, A5, B5, B5R |
A3, A4, A4R, A5, A5R, A6R*, B4, B5, B5R, 11"x17", 8-1/2"x11", 216mm x 340mm (8-1/2” x 13-2/5") |
|
AB-5 |
216 mm x 343 mm (8-1/2" x 13-1/2"), A3, A4, A4R, A5, B5, B5R |
A3, A4, A4R, A5, A5R, A6R*, B4, B5, B5R, 11” x 17", 8-1/2” x 11", 216 mm x 343 mm (8-1/2” x 13-1/2") |
|
Inch-1 |
11" x 17", 8-1/2" x 14", 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2" |
11"x17", 8-1/2"x14", 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", 5-1/2"x8-1/2"R, A3, A4 |
|
Inch-2 |
11" x 17", 216 mm x 330 mm (8-1/2" x 13"), 8-1/2" x 11", 8-1/2" x 11"R, 5-1/2" x 8-1/2" |
11"x17", 216 mm x 330 mm (8-1/2"x13"), 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", 5-1/2"x8-1/2"R, A3, A4 |
|
Inch-3 |
11"x17", 216 mm x 340 mm (8-1/2” x 13-2/5"), 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2" |
11"x17", 216 mmx340 mm (8-1/2” x 13-2/5), 8-1/2"x11", 8-1/2"x11"R, 5-1/2"x8-1/2", 5-1/2” x 8-1/2"R, A3, A4 |
* Can be used with BP-70C31/BP-70C36/BP-70C45/BP-70C55/BP-70C65
Original size detection on the document glass can be
disabled. When this is done, all originals placed on the document glass
are treated as special size originals.
The following original feeding modes can be
set to operate by default in copy, image send, and scan to local
drive. When a mode is frequently used, this saves you from having
to select the mode in another mode each time you need to use it.
* Excluding fax mode and Internet fax mode.
Set whether to display a message when a blank
page is detected by the automatic document feeder.
This setting is available when using the BP-70C31/BP-70C36/BP-70C45/BP-70C55/BP-70C65
and the Double feed detection kit is installed.
If a original overlaps with another original and you try to load
it at the same time, the original will be considered misfed and
loading will be stopped.
Set whether to display a message to select
a remedy when the maximum number of staples is reached.
When the bookbinding function is set, the saddle
stitch staple setting is automatically enabled.
Adjust the position of the folds and staples
when saddle stitching.
The paper types* that
the Auto Paper Selection function will select can be specified.
Select one of the following settings:
* The paper type set for each paper tray by selecting [System Settings] in "Settings" → [Paper Tray Settings].
Set the basis weight of plain paper that is
normally used.
Select from Plain1 and Plain2.
The weight of Plain Paper 1 is 60 to 89 g/m2 (16
to 24 lbs bond). The weight of Plain Paper 2 is 90 to 105 g/m
2 (24 to 28 lbs bond).
When the color mode is set to auto in
copy mode, the discrimination point for detecting whether originals
are color or black and white can be set to one of 5 levels.
When set to [(Closer B/W)], the originals are easier to recognize
as black and white. When set to [Closer color], the originals
are easier to recognize as color.
Select the finish setting. Set whether finishing
positions are specified on the specified paper or on the original.
This is used to disable 2-sided printing, such
as when the duplex module malfunctions.
Disable offset output.
This setting is used to prohibit the use of
staple, such as when the staple of finisher or saddle finisher malfunctions.
This setting is used to prohibit the use of punch, such
as when the punch module of finisher or saddle finisher malfunctions.
(Normally this setting is not necessary.)
When a color-related problem has occurred and printing
is not possible, the use of color mode can be temporarily prohibited.
Black & white printing will still be allowed.
Use this setting to prohibit the use of the
automatic document feeder, such as when the feeder malfunctions.
(When the setting is enabled, scanning is still possible using the
document glass.)
This setting is used to prohibit the use of
the large capacity tray, such as when it malfunctions.
This setting is used to disable the optional
paper drawer, such as when it malfunctions.
This setting is used to prohibit tray settings
(except for the bypass tray).
This setting is used to prohibit the use of
finisher or saddle finisher, such as when it malfunctions.
It is used when the use of the paper folding
unit is prohibited or when it breaks down.
Set the operation of the information indicator.
For each setting, see the following "
INFORMATION INDICATOR".
Data Indicator Setting
Error Light Setting
Sets the operation of the error lamp. For each
setting, see the following "
INFORMATION INDICATOR".
Use
Communication Indicator
Set whether to use the information lamp. Even if this setting
is disabled, faxes will be received and errors will be lit / blinked.
(BP-70C31/BP-70C36/BP-70C45/BP-70C55/BP-70C65)
Use Original Detection Light
for Document Feeder
Set whether to use the document set lamp on the automatic
document feeder.
Use Preventive Light
to Indicate Original Left Behind
Set whether to use the document removal prevention lamp on
the automatic document feeder.
Enter a name or code to identify the machine.
Use this to set the date and time in the machine's built-in
clock.
| Item | Description |
|---|---|
|
Specify Time Zone |
If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is behind GMT, select [-]. Next, specify the time difference between your region and GMT in hours and minutes. (Example: If your region is Japan, + 9 hours 00 minutes.) |
|
Date&Time Settings |
Select and set the year, month, day, hour, and minute. |
Enable daylight saving time.
| Item | Description |
|---|---|
|
Daylight Saving Time Setting |
Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the following settings will not be possible.
|
|
Select Setting Type |
Specify whether the starting and ending day of daylight saving time are to be set using the day of the week or the date. |
|
Start Time |
Set the starting time of daylight saving time. If you selected "Day of the Week" in "Select Setting Type", set the starting week of daylight saving time and then the starting day. If you selected "Date" in "Select Setting Type", set the starting date. Set the hour and minute and the UTC (Coordinated Universal Time) setting. |
|
Completing Time |
Set the ending time of daylight saving time in the same way as you set the starting time. |
|
Adjustment Time |
Set the time to be adjusted when daylight saving time begins. |
The format used to print the date on lists and other
output can be changed.
| Item | Description |
|---|---|
|
Current Setting |
The current time appears in the format set in Date Format. |
|
Format |
Set the order of display of the year, month, and day (YYYY/MM/DD).
|
|
Separator |
Select one of three symbols or a blank space for the separator used in the date.
|
|
Day-Name Position |
Select whether the day name appears before or after the date.
|
|
Time Display |
Select 12-hour format or 24-hour format for the time.
|
The following settings enables or disables certain functions.
The prohibited setting items in the settings of each function
such as copy settings and the items in this prohibited setting are
linked.
Disable Home
Edit Mode when in Device Account Mode
Disable Home Edit Mode when in Device Account Mode.
Disabling of
Registration/Deletion of Program
Copying is prohibited when the orientation of the copy paper
and the original are different, or when the optimum size copy paper
is not loaded.
Disabling of Registration/Deletion
of Program
This is used to prohibit the deletion and changing of copy
settings stored in job programs.
Prohibit Notice Page
Printing
Disables to print a notice page.
Disable Switching of
Display Order
Disables a change of display sequence (search number order,
ascending, descending) in the address book and others.
If set, the display is not sorted even when you tap the tab
on the address book screen.
The currently selected display order will be the order that
is used after the setting is selected.
Disabling Text/Stamp
printing at Reprint
When a stored file is retrieved and printed, the printing
functions are disabled.
This function prevents an inconsistency of the date between
the original data and output data and others.
Cancel Auto Clear Timer
Disables the Auto Clear mode.
* This option is ignored when paper runs out during the job.
Disabling of Document
Feeder
Use this setting to prohibit the use of the automatic document
feeder, such as when the feeder malfunctions. (When the setting
is enabled, scanning is still possible using the document glass.)
This setting is used to set the security enhancement
functions.
Hidden Pattern Print Setting
Disables the direct entry of background pattern and others.
Enter the product key and application number to use
the extensions below.
Serial Number
Barcode Font Kit
Internet Fax Expansion Kit
PS3 expansion kit
Internet Fax Expansion Kit
E-mail Alert and Status
Application Integration Module
Application Communication Module
External Account Module
Direct Print Expansion Kit
OCR Expansion Kit
Enhanced Compression Kit
Virus Detection Kit
Enter the product key and application number for the above
functions.
Version 06a / bp70c65_usr_06a_us
