SHARP

Language

FAX MODE

Fax mode has two modes: easy mode and normal mode.
Easy mode is limited to frequently used functions that allow you to smoothly perform most fax jobs.
If you need to select detailed settings or special functions, use normal mode. All functions can be used in normal mode.

EASY MODE

Easy mode makes it easy to select basic settings for fax.

Show the size of the placed original.
Select an address.
Reset the address and settings.
Scans the original for preview.
Recently used job setting can be loaded.
Tap this key to display the numeric keys.
Change to normal mode.
Change the function display.
Immediately starts sending a fax.
Select function to be set up.

You can select these functions in easy mode.

  • Original SET THE SCANNING OF THE ORIGINALS
  • Exposure CHANGING THE EXPOSURE
  • Resolution CHANGING THE RESOLUTION
    • To select a function in easy mode
    • In "Settings", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] → [Easy Fax].
    • To cancel the warning message displayed when switching from easy mode to normal mode
    • In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] → [Display a Confirmation Message when Selecting "Detail" in Easy Modes] to disable this setting.

    NORMAL MODE

    Normal mode lets you select any function setting that can be used for fax.

    Tap to display the numeric keys.
    Used to display the address book and enter a destination.
    Used to change fax settings.
    Displays the list of setting keys. Frequently used [Others], programs, and other settings can be registered.
    Check the current settings.
    Displays the list of keys other than the function keys indicated above.
    Displays the sizes of the original and the data to send.
    Enter Fax No.
    Finds an address.
    Displays functions available in fax mode.
    Scans the original for preview.
    Reset the address and settings.
    Immediately starts sending a fax.
    Connects a line before starting sending a fax.

    SELECTING FAX MODE

    Change the fax mode to other mode as explained in CHANGING MODES.

    Language

    Version 03a / bp70m65_usr_03a_us

    ↑Top of page