FAX MODE

Fax mode has two modes: easy mode and normal mode.
Easy mode is limited to frequently used functions that allow you to smoothly perform most fax jobs.
If you need to select detailed settings or special functions, use normal mode. All functions can be used in normal mode.

EASY MODE

Easy mode makes it easy to select basic settings for fax.

Show the size of the placed original.

Select an address.

SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE

SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES

Reset the address and settings.

Scans the original for preview.

PREVIEW SCREEN

Recently used job setting can be loaded.

OPERATION PANEL

Tap this key to display the numeric keys.

Change to normal mode.

NORMAL MODE

Change the function display.

Immediately starts sending a fax.

Select function to be set up.

You can select these functions in easy mode.

SET THE SCANNING OF THE ORIGINALS

CHANGING THE EXPOSURE

CHANGING THE RESOLUTION

To select a function in easy mode

To cancel the warning message displayed when switching from easy mode to normal mode

NORMAL MODE

Normal mode lets you select any function setting that can be used for fax.

Tap to display the numeric keys.
Used to display the address book and enter a destination.
Used to change fax settings.
Displays the list of setting keys. Frequently used [Others], programs, and other settings can be registered.
Check the current settings.
Displays the list of keys other than the function keys indicated above.
Displays the sizes of the original and the data to send.
Enter Fax No.
Finds an address.
Displays functions available in fax mode.
Scans the original for preview.: PREVIEW SCREEN
Reset the address and settings.
Immediately starts sending a fax.
Connects a line before starting sending a fax.

SELECTING FAX MODE

Change the fax mode to other mode as explained in CHANGING MODES.

[R] KEY

When the machine is connected to a PBX, the "PBX Setting" can be enabled to automatically connect to the outside line each time you dial normally. When the PBX setting is enabled, the [R] key appears in the base screen. To dial a number inside your PBX, touch the [R] key before dialling to temporarily cancel the "PBX Setting".
In Easy mode

In Normal mode

This Setting can only be activated in Germany.
The [R] key can be included in a fax number stored in an one-touch key.
When the [Speaker] key is touched, the "PBX Setting" is temporarily cancelled and the [R] key does not appear.
When the [R] key is touched before dialling, an F-code (sub-address and passcode) cannot be used. Likewise, an one-touch key in which an F-code (subaddress and passcode) is stored cannot be used.

System Settings (Administrator): PBX Setting
This is used to enable PBX Setting.

FAX MODE

EASY MODE

NORMAL MODE

SELECTING FAX MODE

[R] KEY

CONTENTS MENU