CHECKING TYPE AND SIZE OF PAPER
You can check the type and size of paper loaded in the
inserter on the display to the right of [Upper Tray] or [Lower Tray] key.
The paper size is automatically detected when paper is loaded.
To set the paper type and size, tap the [Type and Size] key. Paper
types and sizes can be specified for each of the upper and lower
trays.
- If
the paper loaded is different from the type that is indicated on
the right of the key, tap the [Type and Size] key or change the settings
in "Settings".
- Special
media such as transparency film and tab paper cannot be used.
To
change the paper settings for the paper you load in the inserter:
Tap the [Type and Size] key or in "Settings", select [System Settings]
→ [Common Settings] → [Paper Settings] → [Paper Tray Settings] → [Inserter(Upper)]
or [Inserter(Lower)].
If the paper size is not correctly detected or paper
of a non-standard size or type is loaded, specify this setting.
