Displays large characters on the screen.
appears in the system area when Large
Character Mode is enabled.
The duration of time that messages appear in
the touch panel (the time until a message is automatically cleared)
can be set to any number of seconds from 1 to 12.
The language that appears in the touch panel
can be changed to any language.
Set the screen that appears after auto clear
and login.
Easy Copy, Easy Scan, Easy Fax, Copy, Print Release, E-mail,
Network Folder/FTP/Desktop, Internet Fax, Fax, Address Book, Address
Book (Easy Scan), Address Book (Easy Fax), Document Filing, Select
from the Home Screen, Sharp OSA screen, Exchange (E-Mail), and Gmail.
When switching between modes, first set whether
to display the "System Information Screen".
This setting specifies whether or not to display
the IP address of the machine on the "System Information" screen.
You can specify to display the "Favourite"
first during mode selection.
Specify whether or not to display with the
action panel on the screen.
Show an icon when a LAN cable is not connected.
Show a confirmation dialog box when a job is
cancelled.
Set whether to display a notification message
when a job is completed.
When this setting is enabled, the total count
is hidden when checking the total count from the home screen.
Set whether the remaining number of sets or
the final number of sets is shown in the job status.
Specify whether or not to display the estimated
start time of the job in the job status.
Set whether the numeric keys are arranged in
ascending order with "1" in the upper left corner, or "1" in the
lower left corner.
Select settings for the path information of
the setting destination displayed when setting mode is set on the
machine.
Display Current Path
Set whether or not the current setting items are shown in
the path information.
Enable link of current path
Set whether the link at the top is enabled.
Set the background colour of the touch panel.
Each time you change patterns, the touch panel image at the bottom
of the screen changes.
Auto Clear Setting
The time until Auto Clear activates can be set to any number
of seconds from 10 to 240 in increments of 10 seconds.
If the machine is not used for the duration of time set here,
the auto clear function will clear any settings that have been selected
and return the screen to the base screen of copy mode or the job
status screen.
Cancel Timer
This is used to disable the auto clear function.
Key Operation Setting
Time for Accepting Key Entry
This setting determines how long a key in the touch
panel must be tapped until the key input is registered. The time
can be set from 0 to 2 seconds in increments of 0.5 seconds.
By lengthening the time setting, key input can be prevented
when a key is tapped accidentally. Keep in mind, however, that when
a longer setting is selected more care is required when tapping
keys to ensure that key input is registered.
Disable Auto Key Repeat
This is used to disable key repeat.
Key repeat causes a setting to change continuously not
only each time the key is tapped but while a key is tapped.
Time for Accepting Key Entry of Long Touch
Select a time when a long key touch is detected.
Double Tap Interval Setting
Select an interval when a double tap is detected.
This setting is used to disable bypass printing
(printing other jobs ahead of a job that has been stopped because
the paper required for the job is not available in any of the trays).
*
* This does not include cases where the paper ran out during the job.
Set the priority for each job and start printing
from the job with the highest priority.
Disables the use of the covers and inserts
function.
Disables the use of manual finishing.
Prohibit the use of [Recent Jobs].
Specifies whether or not "Original Count" in
Others is enabled for each function.
Copy
Received Data Image Check Setting
Select whether or not a preview of received faxes and Internet
faxes is shown. This is displayed when a facsimile expansion kit
or Internet fax expansion kit is installed.
Received Data Image Check Setting:
Configure settings required for remote operation
of the machine from a PC connected to the same network.
Remote Software Operation
Operation from Specified PC
Operation by User who Has Password
Set whether to print the data list with 1-sided
print or 2-sided print.
When two machines are used as network printers
using TCP/IP protocol, use this setting to configure the port number and
IP address of the machine used as the tandem secondary unit.
Disabling of Primary Unit Mode
To prohibit tandem transmission, enable this setting. (Normally
this setting is not necessary.)
Disabling of Secondary Unit Mode
To prohibit tandem reception, enable this setting. (Normally
this setting is not necessary.)
Set the items that can be selected in Easy Copy and
other Easy modes.
The items appear will appear in order on the screen starting
from the item that is set in No. 1.
Items that can be set in Easy
Copy
Paper Select, 2-Sided Copy, Copy Ratio, Staple / Punch, Original,
Exposure, N-Up, Card Shot
Job Build, Blank Page Skip, Dual Page Copy
Set the information that appears when favourite keys
are tapped in normal mode.
Click the Copy, Scan, Internet Fax, Fax, and Data Entry tabs
to configure settings for the favourite key screens shown in each
of the normal modes.
Favourite Key Number
Sets the favourite key number.
The items appear will appear in order on the screen starting from
the item that is set in No. 1.
Key Name
Enter a maximum of 20 characters for the favourite key name.
Function Menu
To set functions such as "Other Functions", select the functions
from the pull-down menu.
Job Programs
To set a program, select one of the preset programs from the
program list.
Not Display
You can hide a set key in the favourite key screen.
Configure settings for the display of mode keys at the
top of the screen.
Modes to Display
Select the mode keys that you want to display.
Display Mode Keys on Home
You can enable display of the mode keys in the home screen
as well.
Display Mode Selection
Screen
Specifies whether or not to display the mode selection screen.
Configure settings for the keyboard used for
entry on the text.
Change the key layout and display according
to the set language.
When an external keyboard is connected, set
whether the external keyboard or the keyboard shown on the touch
panel (soft keyboard) is given priority.
Register a text that you frequently use when
entering an address or domain name in advance.
You can display registered web addresses in the display
field of the setting menu.
By clicking on a custom link, you can jump to the web site
of the registered address.
Version 04a / bp70m90_usr_04a_en
