SHARP

TURNING ON THE POWER

This section describes how to turn on/off the machine's power and how to restart the machine.
Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the [Power] button on the operation panel.

Caution

  • When turning off the main power switch, be sure to press the [Power] button on the operation panel, tap the [Power Off] key on the touch panel, and then set the main power switch to the " " position.
  • In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order. If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off, abnormal noises, degraded image quality or other problems may result.
  • Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
  • When using the fax or Internet fax function, always keep the main power switch in the " " position.
  • If the fax function will be used, and in particular if reception or timer transmission will take place at night, do not turn the main power off.
  • In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the [Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again.

TURNING ON THE POWER

  • Turn the main power switch to the “ " position.
  • When the main power indicator lights in blue, press the [Power] button.

    • TURNING OFF THE POWER

    After pressing the [Power] button, tap the [Power Off] key on the touch.
    To turn off the power for a long time, press the [Power] button to turn off the power, and after the screen display on the operation panel disappears, set the main power switch to the " " position.

    RESTART THE MACHINE

    Press the [Power] button to turn off the power, and then tap the [Power Off] key on the touch panel. After that, press the [Power] button again to turn on the power.

    TURN ON THE POWER SAVING MODE

    Used to switch the machine to the power saving mode of the power saving function.
    After pressing the [Power] button, tap the [Power Save Mode] key on the touch panel.
    For more information about the power saving mode, see " ECO".

    CONTENTS MENU

    Version 01a / bp71m65_usr_01a_us

    ↑Top of page