Use the large capacity tray for outputting massive prints
that cannot be processed using the regular tray.
Large capacity tray (MX-LC12) stores a maximum of 3500 sheets
of 8-1/2" × 11", A4 and B5 paper.
Large capacity tray (MX-LCX3 N) stores a maximum of 3000 sheets
of paper from 12" × 18" (A3W) to 8-1/2" × 11"R (B5).
When changing the paper size, consult the dealer or nearest SHARP
Service Department.
Caution
Do not place heavy objects on the tray or press down on the tray.Pull out the paper tray.
Gently pull the tray out until it stops.Fan the paper.
Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed.Place the paper in the center of the paper table.
Load the paper with the print side facing down. The stack must not be higher than the indicator line (maximum of 3500 sheets).Gently push the paper tray into the machine.
Push the tray firmly all the way into the machine slowly. Forcefully inserting the paper may cause skewed feeding and paper misfeeds.Press the operation button.
The operation button blinks, and the tray paper table goes down to the paper loading position. Wait until the operation button light goes off.Pull out the paper tray.
Gently pull the tray out until it stops.Fan the paper.
Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed.Place the paper in the center of the paper table.
Load the paper with the print side facing down. The stack must not be higher than the indicator line (maximum of 3000 sheets).Caution
Gently push the paper tray into the machine.
Push the tray firmly all the way into the machine slowly.Loosen the paper guide screw.
Slide the plate of the paper guide.
Slide the plate until the red line appears at the center of the size window of the plate.Adjust the paper guide to the paper size that will be used.
Slide the paper guide forward or backward until the size mark of the paper to be used (Secure the paper guide.
Repeat steps 1 through 4 to adjust the far paper guide to the paper size to be used.
Be sure to adjust the far paper guide to the same paper size as the near paper guide.Caution
Adjusting only one paper guide may result in skewed feeding or misfeeds.Change the right paper guide to the paper size to be used.
Set the paper size and paper type.
Be sure to set the paper size and paper type by selecting [Tray Settings] in the home screen or in "Settings", select [System Settings] → [Common Settings] → [Paper Settings] → [Paper Tray Settings].Version 02a / bp90c80_usr_02a_en