Displays large characters on the screen.appears in the system area when Large Character Mode is enabled.
The duration of time that messages appear in the touch panel (the time until a message
is automatically cleared) can be set to any number of seconds from 1 to 12.
The language that appears in the touch panel can be changed to any language.
Set the screen that appears after auto clear and login.
Print Release, Document Filing, Select from the Home Screen, Sharp OSA screen.
When switching between modes, first set whether to display the "System Information
Screen".
This setting specifies whether or not to display the IP address of the machine on
the "System Information" screen.
Specify whether or not to display with the action panel on the screen.
Show an icon when a LAN cable is not connected.
Show a confirmation dialog box when a job is cancelled.
Set whether to display a notification message when a job is completed.
When this setting is enabled, the total count is hidden when checking the total count
from the home screen.
Set whether the remaining number of sets or the final number of sets is shown in the
job status.
Specify whether or not to display the estimated start time of the job in the job status.
Set whether the numeric keys are arranged in ascending order with "1" in the upper
left corner, or "1" in the lower left corner.
Select settings for the path information of the setting destination displayed when
setting mode is set on the machine.
Display Current Path
Set whether or not the current setting items are shown in the path information.
Enable link of current path
Set whether the link at the top is enabled.
Set the background colour of the touch panel. Each time you change patterns, the touch
panel image at the bottom of the screen changes.
Auto Clear Setting
The time until Auto Clear activates can be set to any number of seconds from 10 to
240 in increments of 10 seconds.
If the machine is not used for the duration of time set here, the auto clear function
will clear any settings that have been selected and return the screen to the base
screen of the job status screen.
Cancel Timer
This is used to disable the auto clear function.
Key Operation Setting
Time for Accepting Key Entry
This setting determines how long a key in the touch panel must be tapped until the
key input is registered. The time can be set from 0 to 2 seconds in increments of
0.5 seconds.
By lengthening the time setting, key input can be prevented when a key is tapped accidentally.
Keep in mind, however, that when a longer setting is selected more care is required
when tapping keys to ensure that key input is registered.
Disable Auto Key Repeat
This is used to disable key repeat.
Key repeat causes a setting to change continuously not only each time the key is tapped
but while a key is tapped.
Time for Accepting Key Entry of Long Touch
Select a time when a long key touch is detected.
Double Tap Interval Setting
Select an interval when a double tap is detected.
This setting is used to disable bypass printing (printing other jobs ahead of a job
that has been stopped because the paper required for the job is not available in any
of the trays).*
* This does not include cases where the paper ran out during the job.
Set the priority for each job and start printing from the job with the highest priority.
Received Data Image Check Setting:
Configure settings required for remote operation of the machine from a PC connected
to the same network.
Remote Software Operation
Operation from Specified PC
Operation by User who Has Password
Set whether to print the data list with 1-sided print or 2-sided print.
Configure settings for the display of mode keys at the top of the screen.
Modes to Display
Select the mode keys that you want to display.
Display Mode Keys on Home
You can enable display of the mode keys in the home screen as well.
Display Mode Selection Screen
Specifies whether or not to display the mode selection screen.
Configure settings for the keyboard used for entry on the text.
Change the key layout and display according to the set language.
When an external keyboard is connected, set whether the external keyboard or the keyboard
shown on the touch panel (soft keyboard) is given priority.
Register a text that you frequently use when entering an address or domain name in
advance.
You can display registered web addresses in the display field of the setting menu.
By clicking on a custom link, you can jump to the web site of the registered address.
Version 02a / bpb547pw_usr_02a_en