Image Quality Adjustment

Fusing Cleaning Mode in [Collective Adjustment], and all Common Functions can only be executed in setting mode on the machine.

Collective Adjustment

Various devices mounted on the machine can be set.

Fusing Cleaning Mode

Use this function to clean the machine's fusing unit when dots or other dirt appear on the printed side of the paper. When this function is executed, "V" printed paper is output and the fusing unit is cleaned.

If improvement is not noticed after the first time you use the function, try executing the function again.

Print Image Quality

Quick Image Quality Adjustment

Perform quick adjustment of print quality.
You can change the default setting ([2]) to [1 (Smooth)] or [3 (Sharp)].

Factory default settings:: All 2

Gray Balance

You can adjust the gradation, and density of copies.
The density is divided into 3 ranges and you can adjust the level.

Factory default settings:: All 0

Exposure Adjustment

Set the density of printing.

Factory default settings:: 3 (Normal)

Line Thickness

When lines do not print correctly in special applications such as CAD, you can make lines thicker.

Factory default settings:: 5

Quick Color Balance Adjustment

Use 8-1/2" x 11" or A4 paper for this adjustment.
Press [Execute] to print the test patch.
Select gray area of your choice from the test patch and then enter the corresponding X and Y numbers then press [Execute].
To return adjustment value to the defaults, press [Return Adjustment Value to the Defaults].