CONNECTING AND USING A MOBILE DEVICE WITH THIS MACHINE
You can easily connect the machine to a smartphone or other NFC compatible mobile
device.
- Touch the NFC touch pointarea in the lower right corner of the operation panel.
By installing the dedicated application in the mobile device in advance, the application
will start automatically after the device connects to the machine, allowing you to
print immediately.
You can also connect by displaying a QR code on the machine's touch panel and scanning
the code with a mobile device that has a dedicated application installed.
- Make sure that the mobile device’s Wi-Fi function and NFC function are turned on in
advance.
- For NFC card readers and dedicated applications that can be used, consult your dealer
or nearest authorised service representative.
CONNECTING BY NFC
You can easily connect a mobile device to the machine by holding it to the NFC touch
point area.
In addition, by installing the dedicated application on your mobile device, the application
will automatically start when the device connects to the machine, allowing you to
send data and print to the machine right away.
Configure settings on the machine in advance to enable use of an NFC and wireless
LAN.
- This function may not support depending on the Android version of your device.
- If NFC is used to access the machine and there is no connection to the machine for
a while, the touch panel displays the message "Disable Wireless (Access Point)?".
Hold your mobile device to the NFC touch point area
If the machine is in the auto power shut-off state, holding your mobile device to
the NFC touch point area will wake the machine. However, if [Sleep Mode] is set to
[Energy Saving Priority], you must wake the machine manually.
Connecting to the Machine from a Mobile Device
The machine and mobile device automatically start the connection.
If the dedicated application is not installed, your mobile device will automatically
connect to the Google Play
TMsite and download the dedicated application.
If the dedicated application is installed on your mobile device, it will start.
You can print and scan from the application.
If the connection is not successful, try the following:
- Move the mobile device slowly over the NFC touch point area.
- If a case is attached to the mobile device, remove the case.
CONNECTING BY QR CODE
You can connect by displaying the QR code on the machine's touch panel and then having
your mobile device (with the dedicated application already installed) read the QR
code.
The machine sends the information required for connection to the mobile device, and
the information is saved. No settings are required on the mobile device, and setup
is quickly accomplished.
Configure settings on the machine in advance to enable connection by QR code.
This function can be used on an Android device and on an iOS device.
Tap the [Easy Connect (QR code)] key in the home screen.
The QR code appears on the touch panel.
In advance, enable QR codes in [Easy Connection Setting] in Settings (administrator),
and enable display of the [Easy Connect Setup (QR code)] key in [Home Screen Settings].
Start the dedicated application on your mobile device
Read the QR code on the touch panel with your mobile device
The QR code is the machine's connection information. This information is saved on
your mobile device. You can also set an external access point as the connection destination.
PRINTING USING A MOBILE DEVICE
Use the following application to connect your mobile device to the machine to print
data on the mobile device.
- Before connecting the mobile device to the machine, set the machine to be able to
connect to the mobile device by setting the machine to "Settings (Administrator)"
→ [System Settings] → [Network Settings] → [Wireless Settings].
- See the application's user manual for details on using the application with the corresponding
mobile device.
- Sharpdesk Mobile is available for use with Wi-Fi Direct. See the Sharpdesk Mobile
manual for details.
|
iOS |
Android |
Print
|
AirPrint
Sharpdesk Mobile
|
Sharpdesk Mobile
Print Service Plugin
|