Various devices mounted on the machine can be set.
If the printed colours shift out of position when you print by Colour printing, you
can adjust the print position of each colour to reduce colour shifting.
Tap the [Execute] key.
Use this function to clean the machine's fusing unit when dots or other dirt appear
on the printed side of the paper. When this function is executed, "V" printed paper
is output and the fusing unit is cleaned.
Perform quick adjustment of print quality.
You can change the default setting ([2]) to [1 (Smooth)] or [3 (Sharp)].
This setting can be set separately for colour mode and monochrome mode.
You can adjust the tone and density of colour in colour printing and black & white
printing. You can adjust the default colour, gradation, and density of colour copies
and black & white copies.
The density of each colour is divided into 3 ranges, and you can adjust the level
of each.
Set the density of colour printing and of black & white printing.
When colour lines do not print correctly in special applications such as CAD, you
can make lines thicker.
Set colour profiles used for printing.
This shows the currently set profile name.
Save the current colour profile on the computer.
Select the updated colour profile and click the [Store] key.
This shows the currently set profile name.
Save the current colour profile on the computer.
Select the updated colour profile and click the [Store] key.
This shows the currently set profile name.
Save the current colour profile on the computer.
Select the updated colour profile and click the [Store] key.
Use 8-1/2" x 11" or A4 paper for this adjustment.
Press [Execute] to print the test patch.
Select gray area of your choice from the test patch and then enter the corresponding
X and Y numbers then press [Execute].
To return adjustment value to the defaults, press [Return Adjustment Value to the
Defaults].
Version 02a / bpc542pw_usr_02a_en