SHARP

Language

MAKING COPIES USING THE BYPASS TRAY

MAKING COPIES USING THE BYPASS TRAY

In addition to plain paper, the bypass tray allows you to make copies on transparency film, envelopes, and other special media.

For detailed information on paper that can be loaded into the bypass tray, see " APPLICABLE PAPER TYPES". For precautions on loading paper into the bypass tray, see " LOADING PAPER INTO THE BYPASS TRAY".

Load paper into the bypass tray.

LOADING PAPER INTO THE BYPASS TRAY

Tap the [Paper Select] key, and tap the bypass tray key.

The bypass each tray key displays the size and type of the loaded paper.
SELECTING THE PAPER TRAY FOR COPYING
When the setting requires change, tap the [Type and Size] key and select the paper size and type.
SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS

Tap the [Color Start] or [B/W Start] key to start copying.

SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY

Tap the [Paper Select] key.

SELECTING THE PAPER TRAY FOR COPYING

Tap the [Type and Size] key, and tap the key that meets the type of the loaded paper.

Tap the [Size] tab, and tap the key that meets the size of the loaded paper.

Tap the [Direct Entry] key to enter a numeric value for the size of the loaded paper. After the settings are completed, tap [OK] key.
To directly enter a paper size
Tap the [inch] key to set a paper size in inches, or tap the [AB] key to set it in millimeters.
After you have entered the paper size using the key, tap the [OK] key.
Language

Version 02a / bpc545wd_usr_02a _us

↑Top of page