SHARP

Language

COPY MODE

There are two modes for copying: easy mode and normal mode.
Easy mode is limited to frequently used functions that allow you to smoothly perform most copy jobs.
If you need to select detailed settings or special functions, use normal mode. All functions can be used in normal mode.

EASY MODE

Easy mode makes it easy to select basic settings for copying.
1st screen

2nd screen

Show the size of the placed original.
Reset all settings.
Scans the original and shows a preview image.
Enter the number of copies.
Recently used job setting can be loaded.
Starts copying.
Change the function display.
Select function to be set up.
Change to normal mode.

The following features can be set in easy mode.

  • To select a function in easy mode
  • In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] → [Easy Copy].
  • To cancel the warning message displayed when switching from easy mode to normal mode
  • In "Settings (administrator)", select [System Settings] → [Common Settings] → [Operation Settings] → [Easy Mode Settings] → [Display a Confirmation Message when Selecting "Detail" in Easy Modes] to disable this setting.

NORMAL MODE

Normal mode lets you select any function setting that can be used for copying.

Setting keys used for copying.
Your favorite setting items will be displayed. Register frequently used [Other] and programs. Favorites can be registered when you register a program.
Check the current settings.
Display keys other than the Setting keys indicated above.
Indicates the presence or absence of an original and the size of paper loaded in each tray. Tap to open the paper select screen.
Starts proof copying.
Reset all settings.
Scans the original and shows a preview image.
Displays the functions that can be utilized in copy mode.
Enter the number of copies.
The displayed contents of the above screen will vary depending on the devices installed.

SELECTING COPY MODE

Change the copy mode to other mode as explained in CHANGING MODES.

Language

Version 03a / bp70m65_usr_03a_en

↑Top of page