SHARP

Language

SELECTING THE PAPER TRAY FOR COPYING

The machine is set to automatically select a tray that has the same size of paper as the size of the placed original (Auto Paper Select).
If the original size cannot be detected correctly because it is a non-standard size or when you want to change the paper size for copying, you can select the paper tray manually.

  • If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper, that tray will be automatically selected and the copy job will continue.
  • If a suitable size of copy paper is not loaded, copying may stop.

Tap the [Paper Select] key.

BASIC PROCEDURE FOR MAKING COPIES

Tap the required tray key.

After the settings are completed, tap [OK] key.
In Easy mode
In Normal mode
To automatically select the tray, tap the [Auto] key.
Language

Version 03a / bp70m65_usr_03a_en

↑Top of page