SHARP

Language

OUTPUT AND LAYOUT EDITING FUNCTIONS

MAKING COPIES IN PAMPHLET FORMAT (BOOKLET)

Copies made by "Booklet" can be folded at the centre to create a booklet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
Booklet copy using 8 original pages

Binding side
  • Booklet cannot be selected in easy mode.
  • When Booklet is selected, 2-sided copying mode is automatically selected. When settings are selected that prevent 2-sided copying, the booklet function cannot be used.
  • Scan the originals in order from the first page to the last page. The order of copying will be automatically adjusted by the machine. Four original pages will be copied onto each sheet of paper. Blank pages will be automatically produced at the end of pamphlet copies if the number of original pages is not a multiple of four.
  • STAPLE SETTINGS

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
If the originals are 2-sided, place them in the document feeder tray.

Tap the [Others] key and then the [Booklet] key.

Select the binding edge.

To cancel the booklet setting:
Tap the [Off] key.

Tap the [1-Sided], [2-Sided Booklet] or [2-Sided Tablet] key as appropriate for the original.

When not inserting a cover, go to step 6.

When inserting a cover, tap the [Cover Setting] key, and tap the [On] key.

After the settings are completed, tap the [OK] and [Back] keys in sequence.
To change the cover input tray:
Tap the [Paper Tray] key to display the tray selection screen.
Tap the cover input tray on the tray selection screen.
For more information, see " SELECTING THE PAPER TRAY FOR COPYING".
  • If the cover will be copied on, label sheets and transparency film cannot be used.
  • To cancel all settings:
  • Tap the [CA] key.

Tap the [Start] key to start copying.

COPYING MULTIPLE ORIGINALS ON EACH BOOKLET PAGE (BOOKLET 2-Up/4-Up)

This function copies two or four original pages equally on one page of pamphlet copy paper.
This function is convenient for arranging minimum number of copies into an attractive booklet or pamphlet format.

  • Booklet 2-Up/4-Up cannot be selected in easy mode.
  • The following paper sizes and number of sheets are available for booklet 2-Up or 4-Up.
  • Paper size: A4, A5, B5, 216 mm x 330 mm, 216 mm x 340 mm, 216 mm x 343 mm, 16K, 5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 14
  • Scan the originals in order from the first page to the last page. The order of copying will be automatically adjusted by the machine.
  • Eight or 16 original pages will be copied onto each sheet of paper. Blank pages will be automatically produced at the end if the number of original pages is not a multiple of eight or 16.

Place the original.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
AUTOMATIC DOCUMENT FEEDER
DOCUMENT GLASS
If the originals are 2-sided, place them in the document feeder tray.

Tap the [Output] key, and tap the [Booklet] key.

Select the binding edge.

To cancel the booklet setting:
Tap the [Off] key.

Tap the [1-Sided], [2-Sided Booklet] or [2-Sided Tablet] key as appropriate for the original.

When not inserting a cover, go to step 6.

When inserting a cover, tap the [Cover Setting] key, and tap the [On] key.

  • To change the cover input tray:
  • Tap the [Paper Tray] key to display the tray selection screen.
    Tap the cover input tray on the tray selection screen.
    For more information, see " SELECTING THE PAPER TRAY FOR COPYING".
  • To make a copy on a cover sheet, check the [Make Copy on Cover (Duplex)] box so that appears.
  • If the cover will be copied on, label sheets and transparency film cannot be used.
  • To cancel all settings:
  • Tap the [CA] key.

Tap [N-Up] on the action panel.

Tap the key of the N-Up sheets you wish to use.

If needed, the images will be rotated.
To cancel the N-Up setting
Tap the [Off] key.

Select the layout.

Tap [Border], and select the border.

A line can be inserted between pages arranged on a sheet.
After the settings are completed, tap [OK] key twice, and [Back] keys in sequence.
To cancel all settings:
Tap the [CA] key.

Tap the [Start] key to start copying.

Language

Version 03a / bpb547wd_usr_03a_en

↑Top of page