This function collectively stores various settings as
one program. The stored program can be retrieved using an easy operation.
For example, suppose that the same A4 (8-1/2" x 11") size
documents are distributed to branch offices in various regions once
a month.
(1)The same documents are faxed to each branch office
(2)To save paper, two document pages are faxed as a single
page
(3)Smudges on the edges of the documents are erased before
transmission
When a job program is not stored | When a job program is stored |
---|---|
Enter the fax number for each branch. ![]() Specify N-Up. ![]() Specify Erase. ![]() Tap the [Start] key. Scan and send the original. |
Call the registered program. ![]() Tap the [Start] key. Scan and send the original. |
Considerable time is required to send the documents each month because the above settings must be selected. In addition, mistakes are occasionally made when selecting the settings. |
When a program is stored, settings are selected with ease by simply tapping the key of the program. In addition, transmission takes place according to the stored settings so there are no chances for mistakes. |
This section explains how to enter a destination from
the initial screen of normal mode.
EASY MODE
Place the original.
According to the function stored in the program, place the original in the document feeder tray of the automatic document feeder, or on the document glass.Tap [Call Program] on the action panel.
Tap the desired program key.
Configure additional settings as required.
Tap the [Start] key to start scanning of the original.
If you inserted the original pages in the document feeder tray, all pages are scanned.Version 03a / bpb547wd_usr_03a_en