SHARP

Language

TURNING ON THE POWER

This section describes how to turn on/off the machine's power and how to restart the machine.
Operate the [Power] button on the operation panel.

Caution

  • When turning off the power, be sure to press the [Power] button on the operation panel, tap the [Power Off] key on the touch panel.
  • In a sudden case of power outage, turn the power for the machine back on and then turn it off in the correct order.
  • Turn off both the [Power] button and unplug the power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or when you are moving the machine.
  • In order for some settings to take effect, the machine must be restarted. In this case, press the [Restart Now] button displayed on the screen after registering the settings, or restart the machine from the power reset screen of the System Settings > Status tab.

TURNING ON THE POWER

  • Insert the power plug in the power outlet.
  • When the power indicator lights in blue, press the [Power] button to turn on the power.

TURNING OFF THE POWER

After pressing the [Power] button, tap the [Power Off] key on the touch.

RESTART THE MACHINE

Press the [Power] button to turn off the power, and then tap the [Power Off] key on the touch panel. After that, press the [Power] button again to turn on the power.

TURN ON THE POWER SAVING MODE

Used to switch the machine to the power saving mode of the power saving function.
After pressing the [Power] button, tap the [Power Save Mode] key on the touch panel.
For more information about the power saving mode, see "ECO".

Language

Version 02a / bpc542pw_usr_02a_en

↑Top of page