This function shifts the
copy image right, left or down to adjust the margin.
This is convenient when you wish to bind the copies with a
string or in a binder.
Shifting
the image to the right so the copies can be bound at the left edge
Not using the Margin Shift | Using the Margin Shift |
---|---|
![]() |
![]() |
The punch holes cut off part of the image. |
The image is moved to allow space for the holes so the image is not cut off. |
Margin Shift
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.Tap the [Others] key, and tap the [Margin Shift] key.
Tap the image shift direction.
Sets a margin shift width.
Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area using the numeric keys.Tap the [Start] key to start copying.
The erase function is used to erase shadows
around the edges of copies that occur when copying thick originals
or books.
When
a thick book is copied
Not using the Erase | Using the Erase |
---|---|
![]() |
![]() |
Shadows appear on the copy |
Shadows do not appear on the copy |
Erase modes (Outer Frame Erase, Centre Erase, Edge + Centre Erase,
Side Erase)
Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.Tap the [Others] key, and tap the [Erase] key.
Tap the checkbox of the edge that you wish to erase, and specify the erase position.
Check that the tapped checkbox is set toSpecify the erase width.
Tap the numeric value display indicating the erase width area on the front side or reverse side, and enter the area using the numeric keys.Tap the [Start] key to start copying.
This function centres the copied image on
the paper.
This lets you place the image in the centre of the paper when
the original size is smaller than the paper size or when the image
is reduced.
Not using the centring function | Using the centring function |
---|---|
![]() |
![]() |
Tap the [Others] key, and tap the [Centring] key.
A checkmark appears on the icon.Tap the [Start] key to start copying.
This function moves the scanned original
to a specified position to make a copy.
You can make a copy in any desired position as you can fine
adjust the position.
We recommend that you specify the top as the starting side
of the original.
Copy the original that you want to use for Move Copy.
Copying is performed without using move copy.Measure the movement amount with the top as the starting side of the output copy.
Tap the [Others] key, and tap the [Position Image] key.
Sets a movement distance.
Tap the area indicating the movement distance on the front or reverse side, and enter the distance using numeric keys.Place the original.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.Tap the [Start] key to start copying.
Version 03a / bpb547wd_usr_03a_en