Products Lineup
Photocouplers
OPIC Output <DIP type, Gate drive type>
“OPIC” (Optical IC) is a trademark of SHARP Corporation.
An OPIC consists of a light-detecting element and signal-processing circuit integrated onto a single chip. | |||||||||||||
| (Ta = 25°C) | |||||||||||||
Model No. |
Internal connection diagram |
Features |
Approved by safety standards*3 |
Pac- kage |
Absolute maximum ratings |
Electro-optical characteristics |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Forward current IF (mA) |
Isolation voltage (AC) Viso (rms) (kV) |
Propagation delay time |
|||||||||||
UL |
VDE*2 |
tPHL (us) TYP. |
tPLH (us) TYP. |
Vcc (V) |
IF (mA) |
RG (Ω) |
CG (nF) |
||||||
PC923LRNSZ0F*1 |
 |
• Built-in drive circuit directly connectable to MOS-FET and IGBT • Peak output current: 1.5 A • Low dissipation current (Icc = TYP. 2.5 mA) • High resistance to noise (CMR: MIN. 15 kV/us) |
○ |
○ |
8-pin DIP |
25 |
5.0 |
MAX. 0.5 |
MAX. 0.5 |
15 to 30 |
7 to 16 |
47 |
3 |
PC925LENSZ0F*1 |
|
• Built-in drive circuit directly connectable to MOS-FET and IGBT • Peak output current: 2.5 A • Low dissipation current (Icc = TYP. 2.5 mA) • High resistance to noise (CMR: MIN. 15 kV/us) |
○ |
○ |
8-pin DIP |
25 |
5.0 |
MAX. 0.5 |
MAX. 0.5 |
15 to 30 |
7 to 16 |
10 |
10 |
|
*1 Lead forming type is also available for surface mounting. Taped package of lead forming type for surface mounting is also available.
*2 A VDE approved type is optionally available.
*3 Please refer to Specification Sheets for model numbers approved by safety standards.
|
 |
PC923LRNSZ0F / PC925LENSZ0F (8-pin DIP) |